Table of Contents
Advertisement
Removing the Heat Sink Fan Assembly
WARNING: The heat sink becomes very hot when the system is on. NEVER touch the heat sink with any
metal or with your hands.
1.
Use a phillips screwdriver to loosen the four screws on the heat sink, in the order as shown below.
2.
Lift the heat sink fan assembly away from the mainboard.
3.
Lay down the heat sink fan assembly, in an upright position, on top of the optical drive, as shown below,
then disconnect the fan cable from the mainboard.
24
Aspire AX1470 Service Guide
Hide quick links:
Advertisement
Table of Contents
