Connect The Controller And Receiver; Use The Controller - Acer Aspire R3600 User Manual

12

Connect the controller and receiver

• Make sure the computer power is on and press the power button
on the controller. Player LEDs 1 to 4 will each flash once, in order,
before the power LED turns blue indicating that the power is on.
• Insert the receiver into a USB port and press the SYNC button once.
The receiver LED will flash for 6 to 8 seconds until a connection is
made.
• Press any button on the controller to complete synchronization.
• Once a connection is established, the receiver LED and the player
LED will remain lit.
• If you cannot connect successfully, press the receiver button again
and repeat the steps above.
Once the controller and the receiver are synchronized once, there is no
need to repeat the process.

Use the controller

The controller can be used in a number of motions in games or to
control features on your computer.
• Wave: Wave the controller up and down; or from side to side.
LED
SYNC button