System Switches And Jumpers; Power Button; Reset Button; Ide Connector - Acer Aspire G7700 Series Service Manual

System Switches and Jumpers

Power Button

Press the power button (POWER1) on the mainboard to turn the system on or off.

Reset Button

Press this reset button (RESET1) on the mainboard to reset the system.

IDE Connector

The IDE connector (IDE1) supports IDE hard disk drives, optical disk drives, and other IDE devices.
IMPORTANT:If you install two IDE devices on the same cable, you must configure the drives separately to
master/slave mode by setting jumpers. Refer to IDE device's documentation supplied by the
vendors for jumper setting instructions.
84 Chapter 5