Keyboard Installation
1. Install keyboard on upper cover
2. Connect FPC cable (C) to mainboard connector (D)
3. Align bottom edge of keyboard with palmrest (Figure 3-18).
4. Install 5 keyboard flanges (E) into slots on upper cover (Figure 3-18).
Figure 3-18. Keyboard
5. Press to secure to upper cover.
6. Place computer face down.
7. Install and secure three (3) screws (A) on lower cover
8. Install battery pack.
ID
A
M2.5x5.0
3-16
(Figure
Size
3-17).
(Figure
3-17).
E
(Figure
Quantity
3
Machine Maintenance Procedures
3-14).
Screw Type
0