Touchpad Button Assembly Removal
Prerequisite:
1. Locate assembly (A) on upper cover.
2. Remove adhesive tape (B) from finger print cable (C).
3. Remove three (3) screws (D) from touchpad button frame.
4. Disconnect touchpad module cable (E) from touchpad connector (F).
A
G
Figure 3-42. Fingerprint Module
5. Remove assembly (A) from upper cover.
Touchpad Button Assembly Installation
1. Install and align assembly (A) with pins (G) to upper cover.
2. Connect touchpad module cable (E) to touchpad module connector (F).
3. Install and secure three (3) screws (D) to touchpad button frame.
4. Install and secure adhesive tape (B) to finger print cable (C).
5. Install upper cover.
ID
D
M2.0x2.5
Machine Maintenance Procedures
Upper Cover Removal
D
Size
0
E
F
B
G
Quantity
3
C
Screw Type
3-35
0