Acer TravelMate 520 Service Manual page 48

Full Test performs all test items in detail for your system.
Quick Test performs all test items quickly for your system.
The screen below appears if you select Multi Test.
Specify the desired number of tests and press Enter.
After you specify the number of tests to perform, the screen shows a list of test items (see below).
Move the highlight bar from one item to another. Press Space to enable or disable the item. Press Enter to
view the available options of each selected item. Press Esc to close the submenu.
The right corner screen information gives you the available function keys and the specified test number.
6
Space: Enables/disables the item
6
ESC: Exits the program
6
F1: Help
6
F2: Tests the selected item(s)
6
Enter: Opens the available options
6
Test Times: Indicates the number of tests to perform.
NOTE: The F1 and F2 keys function only after you finish configuring the Test option.
NOTE: When any errors are detected by diagnostic program, refer to "Index of PQA Diagnostic Error Code,
Message" on page 81 for troubleshooting.
42
PQA
PQA
Diag Result
SysInfo
Result
Diag SysInfo
Diag
Diag
ONE TEST
One TEST
MULTI TEST
Multi TEST
FULL TEST
QUICK TEST
TEST COUNT VALUE (1...9999) 1
PQA
Diag Result
SysInfo
Diag
Test Items
MANUAL TEST
[ ] System Board
AUTO TEST
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
SPACE: mark/unmark selecting item
[ ] Hard Disk
ESC
[ ] CD-ROM
[ ] Coprocessor
F2
[ ] Pointing Dev.
ENTER: open sub-item's menu
[ ] Cache
Test Times = 1
Vx_x xx-xx-xx
Vx_x xx-xx-xx
Option
Exit
Option
Exit
Vx_x xx-xx-xx
Option
Exit
: return to upper menu
: test the marked item(s)
Chapter 2