Save/Transfer The Measuring Results; Saving Measuring Results As An Image; Data Transfer Via Usb Type-C® Interface; Data Transfer Via Sd Card - Bosch Professional D-tect 200 C Original Instructions Manual

English | 51
If a required distance is to be marked on the wall, mark it using the top marking aid (1).

Save/transfer the measuring results

Saving Measuring Results as an Image

A screenshot function is available in the <Object View>. This enables you to save meas-
urement results as an image in order to document them or to analyse them later on.
Measure the required range as usual. Then press the screenshot button (13).
If an SD card is inserted, the images are saved on the card. Otherwise, the images are
stored in the internal memory of the measuring tool and can be transferred via the USB
Type-C® interface.
Data transfer via USB Type-C® interface
Open the flap for the USB Type-C® port (4). Connect the USB Type-C® port of the
switched-off measuring tool to your PC via the USB Type-C® cable (23).
Switch on the measuring tool using the on/off button (8).
Open the file browser on your PC and select the BOSCH D‑tect 200 C drive. The saved
files can be copied from the internal memory of the measuring tool, moved to your PC or
deleted.
As soon as you have completed the required operation, disconnect the drive following
the standard procedure.
Note: Always disconnect the drive from the operating system of the PC first (eject drive),
as failure to do so may damage the internal memory of the measuring tool.
Then switch off the measuring tool using the on/off button (8). Remove the USB Type-C®
cable (23). Close the flap for the USB Type-C® port (4) to protect it from dust or
splashes.
Note: Use the USB Type-C® interface to connect the measuring tool to a PC only. The
measuring tool may be damaged if connected to other devices.
Note: The USB Type-C® interface can only be used for data transfer. Rechargeable bat-
teries or other devices cannot be charged by this interface.

Data Transfer via SD Card

If an SD card is inserted in the measuring tool, images are automatically stored on the
card when saved, not in the internal memory of the measuring tool.
To insert the SD card, open the flap of the slot (3). Pay attention to the correct orienta-
tion when inserting the SD card. Close the flap of the slot (3) to protect it from dust or
splashes.
Note: Switch off the measuring tool before removing the SD card. Otherwise, the SD
card may be damaged.
Bosch Power Tools 1 609 92A 5L5 | (11.01.2021)