Removing the Switch Cover
CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is
recommended that only fingers are used to remove the Switch Cover.
1. See "Removing the Battery Pack" on page 48.
2. Locate and remove the three securing screws as shown.
Step
Switch Cover
3. Turn the computer over and open the LCD module fully to expose the Switch Cover.
4. Lift the Switch Cover as shown, leftside first.
5. Lift the Switch Cover clear of the chassis.
64
Size
M2*3(NL)
Quantity
3
Screw Type
Chapter 3