Worthington Bernzomatic BZ8250HT Instruction Manual

Worthington Bernzomatic BZ8250HT Instruction Manual

Trigger-start torches

Advertisement

DANGER
1
6
5
1
1
7
1
4
1
3
2
1
1
1
WARNING
Materials used in the construction of this device may contain brass (which may contain lead), a chemical known to the
State of California to cause birth defects or other reproductive harm.
Combustion by-products produced when using this device contain chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
• Keep torch out of reach of children and anyone who has not read instructions. Do not point torch towards face, other
persons or flammable objects. Never attempt to use torch as a cigarette lighter.
• Disconnect cylinder when not in use.
• Never attempt to modify the torch construction and never use unapproved accessories or fuels.
• Treat the torch as you would any fine tool or instrument. Do not drop, throw, or otherwise abuse.
• Do not use a leaking, damaged or malfunctioning torch.
• Always wear safety glasses, protective gloves and use proper tools to handle hot work.
• Radiant energy can harm your eyes.  Wear glasses having an appropriate lens shade number (see 29 CFR 1926.102)
for the torch operation being done; brazing and light cutting  (3 or 4), medium cutting and light welding (4 or 5), heavy
cutting and medium/heavy welding (5-8).
• Work only in well-ventilated areas. Avoid the fumes from fluxes, lead-based paint, and all metal heating operations. Be
careful to avoid fumes from cadmium plating and galvanized metal- remove these coatings in the area to be heated by
filing or sanding prior to heating.
INSTRUCTION MANUAL
Trigger-Start Torches
Models: BZ8250HT
This torch is used with a flammable product. Failure to comply with these warnings and
instructions may result in an explosion or fire that may cause property damage, serious
personal injury or death.
Read and comply with the instructions and warnings in this manual and familiarize yourself
with the torch before lighting and using. Review instructions and warnings periodically to
maintain awareness. Do not try to operate before reading instructions.
Torches are to be used only with hand held gas cylinders specifically designated for
use with torches.
DANGER
INCENDIE EXPLOSION
FUMES
08/19/16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bernzomatic BZ8250HT and is the answer not in the manual?

Questions and answers

Summary of Contents for Worthington Bernzomatic BZ8250HT

  • Page 1 DANGER INCENDIE EXPLOSION FUMES INSTRUCTION MANUAL Trigger-Start Torches Models: BZ8250HT DANGER  This torch is used with a flammable product. Failure to comply with these warnings and instructions may result in an explosion or fire that may cause property damage, serious personal injury or death.
  • Page 2 • Never use torch to strip lead paint. • Be careful when using the torch outdoors on sunny or windy days. Bright light makes it difficult to see the torch’s flame. Wind may carry the torch’s heat back towards you or other areas not intended to be heated. Windy conditions may also cause sparks to be blown into other areas with combustible materials.
  • Page 3 USING THE HOLSTER 1. Assemble the cylinder into holster (6) using diagram provided below. 2. Attach holster to belt using belt clip on reverse side of holster. Right handed users, attach on your right side. Left-handed users, attach on your left side.
  • Page 4 ADDITIONAL WARNINGS  • Make sure the torch is cool before installing or removing cylinder and accessories. Using a low flame can cause damage to the burn tube and ignition system. • Check all joints and couplings periodically to insure against loose connections. With valve open, without lighting, test all connections with soapy water.

Table of Contents