Setting A Timer Or Timed Recording - JVC LT-39C600 Instruction Manual

Setting a Timer or Timed Recording

This function is used to perform scheduled recordings or timers (will switch the programme on when it starts).
The recording from timers or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the HOME button then press the
Press to highlight TIMERS and press OK.
The TIMERS menu will now be displayed, if you have already set some other
recordings you'll see them here.
2. ADD TIMER will be selected, press OK. The ADD TIMER menu will be
displayed.
3. Adding the timer
Press the
to select each setting below.
Channel Type Press the
you want to set a timer for.
ALL - Will allow you to select any channel
DIGITAL AERIAL - Will only let you select channels
from your aerial.
Timer Type
Press the
RECORD - Will record a programme
TIMER - Will automatically switch to the selected
programme when it starts.
Channel
Press the
Record Type
Not adjustable.
Date
Press the
set the date.
Start Press the
set the start time.
End Press the
set the end time.
Duration
Set automatically.
Repeat
Press the
ONCE - DAILY - WEEKLY or just WEEKDAYS.
Change/Delete
Press the
DISALLOWED
ALLOWED - You allow anyone to change or delete the
recording.
DISALLOWED - You will have to enter the PIN code to
change or delete the recording.
Playback
Press the
SETTINGS, DISALLOWED or ALLOWED. You will
need to enter the PIN number if you want to play a
recording when you select 'use parental settings and
disallowed' .
JVC 39' LED Smart HD TV LT-39C600 Manual.indd 31
buttons to select TV.
buttons to select the channel type that
buttons to select RECORD or TIMER.
buttons to select the channel.
buttons and the NUMBER buttons to
buttons and the NUMBER buttons to
buttons and the NUMBER buttons to
buttons to set the recording to record
buttons to select ALLOWED or
buttons to select USE PARENTAL
Using the Features
• When the preset time is reached, the
TV will start recording automatically.
• If a programme recording starts
when the TV is in standby mode, the
LED indicator will flash.
5
31
16/03/2020 15:02