11-3.Others - Fujitsu AUXG24KRLB Design & Technical Manual

11-3. Others
Exterior
11-3. Others
Part name Model name
Human sensor
UTY-SHZXC
kit
External
UTY-XWZXZG
connect kit
Air outlet shutter
UTR-YDZK
plate
Wide panel UTG-AKXA-W
Panel spacer UTG-BKXA-W
Fresh-air intake
UTZ-VXRA
kit
Insulation for
UTZ-KXRA
high humidity
External input
UTY-XCSX
and output PCB
External input
and output PCB UTZ-GXRA
box
- 58 -
Summary
For circular flow cassette type.
Use to connect with various peripheral
devices and air conditioner PCB.
For control output port.
Installed at the air outlet when 3-
directions mode is performed.
Hides the gap between the ceiling hole
and the cassette grille.
If there is not enough height in the
ceiling space, by inserting this spacer
between the cassette grille and the
ceiling surface, the height of the unit
body goes into the ceiling space
become 50-mm lower.
By attaching Fresh-air intake kit to the
indoor unit, it can be taken in fresh air
of up to 10% of "high" air volume of
the indoor unit.
Install when the under-roof condition is
expected to be the humidity of over
80% and the temperature of over
30 °C.
Use to connect with external devices
and air conditioner PCB.
For installing the External input and
output PCB.
11. Optional parts