Technical Data; Cleaning And Maintenance - Black & Decker JC250 Manual

ENGLISH
•
As soon as the water has boiled, the
appliance will switch off and the power on
indicator (5) will go out.
•
Always ensure the kettle has turned off
before lifting it from the kettle base.
•
To switch the appliance off during boiling,
push the On / Off switch (1) the off
position (O).
•
If you do not want to use the boiled water
immediately, the kettle may be left on the
base. If you want to bring the water back to
boil after a while, push the on / off switch (1)
to on again.
•
The outer surface of the kettle may become
hot when in use
Pouring boiled water
Caution: Ensure that the kettle is switched off
before removing it from its stand.
•
Take the kettle off the base.
•
To avoid scalding, tilt the kettle slowly to pour
the boiled water.
•
After pouring, place the kettle back on the
base and remove the plug from the socket.

Cleaning and maintenance

Warning! Before cleaning and maintenance,
switch the appliance off, remove the plug from
the socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the
base, the cord set or the plug in water or any
other liquid.
•
Wipe the exterior with a damp cloth.
•
Do not use scouring pads.
•
If necessary, use a mild detergent to remove
spots.
6
•
Do not use any abrasive or solvent based
cleaner.
•
Do not immerse the kettle, base, cord or plug
in any liquid.

Technical Data:

Input Voltage
Power input
Weight
JC250
220-240V ~ 50/60 Hz
1850-2200W
0.84kg