Honda 2010 Ridgeline Owner's Manual page 52

Installing a Child Seat
Installing a Child Seat with a
Tether
COVER
UPPER
GUIDE
A child seat with a tether can be
installed in any seating position in
the back seat.
Each outer seating position has a
tether anchor at the outside of the
seat bottom. The center seating
position has a tether anchor between
the lower anchors for the LATCH-
compatible child seat. Each anchor
point is shown above.
48
When using a tether anchor, always
hook the tether strap through the
upper guide to route it properly.
CENTER
TETHER
Since a tether can provide additional
ANCHOR
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
OUTER
TETHER
ANCHOR
2010 Ridgeline
Using an Outer Tether Anchor
UPPER GUIDE
OUTER TETHER ANCHOR
1. After properly securing the child
seat (see page 46 ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
2. Lift the cover, then hook the
tether strap through the upper
guide as shown.