Headlamp High/Low-Beam Changer - GMC 2001 Safari Owner's Manual

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuse (see "Fuses and Circuit
Breakers" in the Index) and for burned
If you have a trailer towing option with added wiring for
the trailer lamps, a different turn signal flasher is used.
With this flasher installed, the signal indicator will flash
even if a turn signal bulb is burned out. Check the front
and rear turn signal lamps regularly to make sure they
are working.
Turn Signal On Chime
If your turn signal is left on for more than 3/4 of a
mile (1.2 km), a chime will sound at each flash of the
turn signal. To turn off the chime, move the turn signal
lever to the off position.
2-36

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high or high
to low, pull the multifunction lever all the way toward
-
out bulbs.
you. Then release it.
Flash-to-Pass
This feature lets you use your high
signal a driver in front of you that you want to pass.
It works even if your headlamps are in automatic.
To use it, pull the turn signal lever toward you, but not
so far that you hear a click.
If your headlamps are in automatic or on low beam,
your high
as long as you hold the lever toward you and the
high
Release the lever to return to normal operation.
When the high beams are
on, this indicator light on
the instrument panel cluster
also will be on.
-
beam headlamps will turn on. They'll stay on
-
beam indicator on the cluster will come on.
-
beam headlamps to