GMC 1999 Jimmy Owner's Manual page 279

CAUTION:
Never use oil or grease on studs or nuts. If you
do, the nuts might come loose. Your wheel could
fall off, causing a serious accident.
7. Place the spare on the wheel mounting surface.
Tighten each nut by hand until the wheel is held against
the hub. If a nut can't be turned by hand, use the wheel
wrench and see your dealer as soon as possible.
8. Put the nuts on by hand.
Make sure the
-
cone shaped end is
toward the wheel.
9. Lower the vehicle by turning the jack handle
counterclockwise. Lower the jack completely.
yellowblue
5-27