General Operation; Sidebrush Installation - Cleanmate S400 User Manual

GENERAL OPERATION

Starting Operation
1.Before operation, empty the dust bin and install the filter properly.
2.Place the product in a room with much free space, and then power it on to do cleaning work.
3,When th e product runs out of power, th e LED indicator in th e illumination ring will turn red, and
th e product will stop working.
Note:
Remove the side brushes before using the product on the carpet, Remove the dusting paper holder and side brushes before using the product on the carpet,
*
just to avoid wearing th ese parts.
This product is not suitable for long-pile carpets
*
SIDE BRUSH INSTALLATION
Put the L side brush at L side and R side brush at R side on the underside and then push down to fixate it.
To remove the brushes, just pull up and side brushes will be removed.
11
6