Table of Contents
Advertisement
To connect in STB mode (Option 2)
1
Connect one end of a TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end
to the VHF/UHF input port on the back panel of your set-top box (STB) (3).
2
Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF output port on the set-top box (STB) (3). Connect
the other end to the single-connection end of a splitter device (5) (not supplied).
3
Connect a third TV coaxial cable (6) (not supplied) to the double-connection end of the splitter device (5). Connect the
other end to the CABLE/ANT ANALOG input port (7) on the computer.
4
Connect a fourth TV coaxial cable (8) (not supplied) to the double-connection end of the splitter device (5). Connect the
other end to the VHF/UHF input port (9) on your TV monitor or display.
n
66
N
Using Your VAIO Computer
Hide quick links:
Advertisement
Table of Contents
