Using The PC Card Slot
Your computer may not be equipped with a PC card slot as described in this section, depending on the hardware
configuration purchased. To view the specific system configuration for your computer see the online specifications sheet.
Your computer's PC card slot supports Type I or Type II PC (PCMCIA) cards. You do not need to shut down your computer
when inserting a PC Card. For more information, see the instructions supplied with your PC Card.
To insert a PC Card
Use your fingertip to pull open the lower front panel cover, as shown.
Opening the lower front panel (PCV- RZ series m odel shown)
With the label facing up, insert the PC Card into the PC Card slot.
Inserting a PC Card
Push the PC Card gently into the slot. The card is automatically detected and the
icon appears in the Windows
If the PC Card does not insert easily, remove it from the PC Card slot and verify that it is not upside-down or
backwards. Carefully reinsert the PC Card, but do not force it into the slot.
To remove a PC Card
Safely Remove Hardware