Sony KDS-70Q006 Quick Setup Manual

Quick Setup Guide
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our QUALIA Call Center at 1-877-782-5423 for US residents or
Customer Relations Center 1-877-899-SONY (7669) for Canadian residents.
Sony Corporation © 2004 Printed in Japan
2-590-305-12(1)
Checking the
1
Supplied Accessories
Along with your new SXRD projection TV, the packing box contains
a remote control, two AA (R6) batteries, cleaning cloth, etc. These
items are all you need to set up and use the TV.
2
Connecting Your TV
• Review the following chart to determine which diagram to use to
connect the components in your system:
For these components See reverse side
DVD
Cable Antenna
VCR
Player
CableCARD
(optional)
Cable Box DVD AV Receiver
Cable Antenna
VCR
Player
or
Satellite Receiver
DVD
Cable Antenna Cable Box Satellite Receiver
VCR
Player
DVD
Cable Antenna HD Cable Box AV Receiver Digital Recorder
Player
or
HD Sat Receiver
DVD
Cable Antenna HD Cable Box
VCR
Player
Sony
Cable Box
Cable Antenna
VCR Dream System
or
Satellite Receiver
• See the "Cables Required" chart that appears with the diagram to
determine which cables you'll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you'll need a special bi-
directional splitter that's compatible with your cable box. Contact
your cable provider for details.
Making Video Connections
Best Video
Your TV includes
Performance
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best video
performance, as
described in right.
Additional Connections
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you'll need to connect the satellite antenna. If you
have an A/V receiver, you'll need to connect speakers.
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an A/V receiver can often be
very complex, so check your A/V receiver's instruction manual for additional details.
Activating CableCARD™ Service
Before you can use CableCARD service,
you need to insert the CableCARD
(supplied by your cable provider) and
activate the service.
Inserting the CableCARD incorrectly may result in permanent damage to the card and
the TV.
3

Running Initial Setup

1
Press POWER to turn on the TV.
The Initial Setup screen appears.
2
Press V/v to select the on-screen display language. Then press
.
The message "Start auto program now?" appears.
Auto Program may take more than 50 minutes to complete. A progress bar will
display the approximate progress of the Auto Program and Digital Channels/Add
sequences.
3
Press V/v to select "Yes", then press .
A
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
B
To run Auto Program again at a later time
Use the Auto Program feature as described in "Selecting Channel
C
Options" in the Owner's Guide.
To add individual digital channels
D
Use the Digital Channel feature as described in "Selecting Channel
Options" in the Owner's Guide.
E
F
4

Programming the Remote Control

Connector type
HDMI
The remote control is preset to operate Sony brand video equipment.
(High-Definition
Multimedia Interface)
Sony Equipment
Component video
DVD/VCR
S VIDEO SAT/Cable
i.LINK
Composite video
If you have video equipment other than Sony brand that you want to
RF/Coaxial
control with the SXRD projection TV's remote control, use the
following procedures to program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
2
5
1
Press FUNCTION repeatedly until the DVD/VCR,
1
SAT/CABLE or i.LINK indicator lights up.
2
Press SAT/CABLE for five seconds until the
indicator of the selected input flashes.
3
3
While the desired indicator is flashing, enter the
4
three-digit manufacturer's code number.
4
Press ENTER.
6
R L 5
To check if the code number works, aim the SXRD
CableCARD
AUDIO IN
projection TV's remote control at the equipment
HD/D
DIGITAL VIDEO IN (1080i/720
AUDIO
(OPTICAL) 1 3 4 and press SAT/CABLE that corresponds with that
OUT
S VIDEO
PCM/DOLBY DIGITAL
equipment. If it responds, you are done. If not, try
CABLE
VIDEO
using another code listed for that manufacturer.
L
i.LINK (MONO)
is400 AUDIO
R
TS/DV/MICROMV/HDV
VHF/UHF
If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
If you enter a new code number, the code number you previously entered at that setting
is erased.
In some cases, you may not be able to operate your equipment with the supplied
remote control. In such cases, use the equipment's own remote control unit.
Manufacturer's codes
Manufacturer
Fisher
DVD Players
Funai
Manufacturer Code General Electric
Go Video
Sony 751
Goldstar
Sony (i.LINK) 901
Hitachi
General Electric 755
Instant Replay
Hitachi 758
JC Penney
JVC 756
Magnavox 757
JVC
Mitsubishi 761
Oritron 759
Kenwood
Panasonic 753
LG
Philips 757
LXI (SEARS)
Pioneer 752
RCA/PROSCAN 755
Magnavox
Samsung 758 Marantz
Toshiba 754 Marta
Zenith 760 Memorex
Minolta
Laserdisc Players
Mitsubishi/MGA
Multitech
Manufacturer Code
NEC
Sony 701
Olympic
Panasonic 704, 710
Optimus
Pioneer 702
Orion
Panasonic
VCRs
Pentax
Manufacturer Code
Philco
Sony 301, 302, 303
Philips
Admiral (M. Ward) 327
Pioneer
Aiwa* 338, 344
Quasar
Audio Dynamic 314, 337
RCA/PROSCAN
Broksonic 319, 317
Canon 309, 308
Realistic
Citizen 332
Craig 302, 332
Sansui
Criterion 315
Samsung
Curtis Mathes 304, 338, 309
Sanyo
Daewoo 341, 312, 309
Scott
DBX 314, 336, 337
Dimensia 304
Sharp
Emerson 319, 320, 316, 317, Signature 2000 (M.Ward) 338, 327
318, 341
SV 2000
Replacing the Lamp
If the screen becomes dark, the color looks unusual, or the LAMP
indicator on the front of the SXRD projection TV flashes, it is time
to replace the lamp with a new one (not supplied).
Programmable Code Number
Use a Sony XL-5000 replacement lamp (not supplied) for replacement. Use of any
other lamp may damage the SXRD projection TV.
751 (Sony DVD Player)
Wait until the cooling fan turns off (about two minutes) and then unplug the power
cord. (The cooling fan will continue to blow for about two minutes after turning the
801 (Sony Satellite Receiver)
power off.)
901 (Sony DVD Player (i.LINK))
Allow the lamp to cool down completely before removing it. The surface of the lamp
remains extremely hot for at least 30 minutes after the power has been turned off.
Remove the dust inside the lamp slot with a vacuum cleaner, after pulling out the
lamp.
1
Put both hands underneath the Front Panel Cover and locate
the screw on each side of the cover.
Loosen the screws by turning them counterclockwise and
remove the cover.
2
Pull out the lamp.
Loosen the screw on the lamp cover with a coin or similar
object, slide the knob to the left. Put fingers on the right edge
of the cover and pull it forward to remove the cover.
Loosen the two screws that hold the lamp using the hex key
supplied with the lamp, and then pull out the lamp.
3
Attach the new lamp.
Code Manufacturer Code
330, 335 Sylvania 308, 309, 338, 310 Making sure the front glass of the new lamp is facing the left
338 Symphonic 338
side of the lamp slot, place the lamp and tighten the screws.
329, 304, 309 Tashiro 332
322, 339, 340 Tatung 314, 336, 337
332 Teac 314, 336, 338, 337
306, 304, 305, 338 Technics 309, 308
309, 308 Toshiba 312, 311
309, 305, 304, 330, Wards 327, 328, 335, 331,
314, 336, 337 332
314, 336, 337, 345, Yamaha 314, 330, 336, 337
346, 347
Zenith 331
314, 336, 332, 337
332
Cable Boxes
332, 305, 330, 335,
Manufacturer Code
338
Making sure the black pin on the back of the lamp cover goes
Sony 230
308, 309, 310
314, 336, 337 Hamlin/Regal 222, 223, 224, 225,
to the hole on the TV, put the lamp cover back on. Slide the
226
332
Jerrold/G.I./Motorola 201, 202, 203, 204,
knob to the right until the v/V marks match, and then tighten
309, 335
205, 206, 207, 208,
305, 304
218
the screw.
323, 324, 325, 326
Oak 227, 228, 229
325, 338, 321
Panasonic 219, 220, 221
314, 336, 337
Pioneer 214, 215
309, 308
Scientific Atlanta 209, 210, 211
327
Tocom 216, 217
317
Zenith 212, 213
308, 309, 306, 307
305, 304 Satellite Receivers
308, 309
Manufacturer Code
308, 309, 310
Sony 801
308
Dish Network 810
308, 309, 306 4
Reattach the Front Panel Cover securely and tighten the two
Echostar 810
304, 305, 308, 309,
General Electric 802
311, 312, 313, 310,
screws underneath the cover.
329
Hitachi 805
309, 330, 328, 335,
Hughes 804
324, 338
Mitsubishi 809
314
Panasonic 803
322, 313, 321
RCA/PROSCAN 802, 808
330, 335
Toshiba 806, 807
312, 313, 321, 335,
323, 324, 325, 326
* If an Aiwa VCR does not
327, 328
work even though you enter
the code for Aiwa, enter the
338
code for Sony instead.
STD/DUO POWER
STD/DUO POWER