Sony KDL-46HX820 Setup Guide (Operating Instructions) Setup Manual page 19
Lcd digital color tv
Hide thumbs
Also See for KDL-46HX820 Setup Guide (Operating Instructions):
- Service training manual (191 pages) ,
- Specifications (5 pages) ,
- Installation manual (5 pages)
Table of Contents
Advertisement
An alternative way to secure the TV is with
an optional Sony Support Belt Kit. The
Sony Support Belt Kit is available as an
optional accessory, depending on your TV
model.
Machine
screw (not
supplied)
Rope or chain
(not supplied)
Screw hole on the
Table-Top Stand
Screw (not supplied)
The length of the M6/M4 machine screw
differs depending on the rope or chain
diameter. Please refer to below illustration.
Screw M6/M4
Rope or
chain
5-6 mm
TV’s
Table-Top
Stand
~
Contact Sony Customer Support to obtain the
optional Support Belt Kit by providing your TV
model name.
• For United States call: 1-800-488-7669 or
visit: www.sony.com/accessories
• For Canada call: 1-877-899-7669
3
Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Anchor bolts (M6) (not supplied)
Rope or
Wall-
chain
mount
(not
holes
supplied)
Wall-anchor
(not
supplied)
~
• Your TV is shipped with screws attached to the
rear of the TV depending on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two
screws prior to anchoring the TV on a wall.
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow
the three measures recommended.
Page 19
Hide quick links:
Advertisement
Table of Contents
