Components, Work Tips - Husqvarna DM220 Workshop Manual

2
2
1
Components
1. Drill spindle
2. Water connection/dust extraction
3. Gear knob
4. Gear housing
5. Gear box cover
6. Electronic spirit level
4

COMPONENTS, WORK TIPS

4
3
16
15
17
18
7. Power indicator
8. Electric motor
9. Inspection cover for carbon brushes
10. Circuit breaker
11. Circuit breaker lock
12. Rear handle
13. Mains cable
Two different types
DM 220 has been updated and the later building has the gearbox bolted from the
front for easier access.
The two different types will be called:
Type A
Type B
Two procedures differ between the types
• Dismantling of gear housing/gear box cover
• Adjusting the slip clutch
The difference between the types can be seen on the gear housing. On type B, the
screws attaching the Gear housing to the Gear box cover are visible.
6 7
5
8
11
9 10
14
14. Earth fault breaker
15. Stand mount and oil plug under
the cover
16. Front handle
17. Water hose (connects at 2)
18. Sleeve for dust extractor (connects at 2)
12
13
115 42 19-26