Sony mylo com-1 Operating Instructions Manual page 30

30
30
Getting Started...
To add wireless network manually
Select "Add Manually" on the Connection Manager screen (  page 180). The
Wireless Network Settings screen appears. Fill in the listed items on the screen
with the information about wireless network you want to register.
To change to the infrastructure mode
1
Press and hold HOME to display the What's Up screen.
2
Press OPTION.
The Context menu appears.
3
Press / to select "Switch Wireless LAN Mode," and then press
the center button.
To disconnect from wireless network
Slide and hold the WIRELESS LAN switch upward. The unit disconnects
from wireless network. The WIRELESS LAN indicator and Status indicator
turn off, and
To check the signal strength of the network connection
The signal strength of the connected network connection is displayed on the
status bar of the display. The more circles displayed around the antenna, the
stronger the signal of the network connection. When the unit is not connected
to wireless network, a gray antenna is displayed.
 
Setting the Connecting Method
changes to "OFF" on the status bar.
 