Sony FWD-S42E1 Operating Instructions Manual page 63

Menu
Color Temp.
Cool
Neutral
Warm
Custom
Brightness Boost
Reset
Sound Mode
Dynamic
Standard
Custom
Sound Mode Adjust.
Treble
Bass
Balance
Surround
Reset
* Only select during video input.
Function and operation
White tone can be adjusted to suit your preference. Default settings are set when shipped
from factory.
Tip
Restores the default settings by selecting "Reset" on the tone adjusting screen.
Gives white colors a blue tint.
Gives white colors a neutral tint.
Gives white colors a red tint.
Enables a broader range of white tone to be set than above.
Select "On" or "Off". If you select "On", then the picture quality is adjusted to emphasize
brightness.
Notes
• You can only set "Brightness Boost" when "Picture Mode" is set to "Vivid".
• When "Brightness Boost" is set to "On", you cannot adjust the "Backlight",
"Contrast", "Brightness" or "Color Temp." settings.
• When "Brightness Boost" is set to "On", "Backlight" is set to "Max" and "ECO
Mode" is switched "Off", the brightness is at its maximum.
Select "Cancel" or "OK". If you select "OK", it resets all settings of "Picture Mode
Adjust." to default settings.
You can adjust the sound output from the speakers SS-SPG02 (not supplied) with various
"Sound Mode" settings.
Enhances treble and bass.
Flat setting.
For more detailed adjustment.
You can adjust sound tone in detail.
Tip
You can set "Treble" and "Bass" when the "Sound Mode" is set to "Custom".
Adjusts to increase or decrease treble.
Adjusts to increase or decrease base.
Adjusts left/right speaker balance.
Select "Off" or "On". If you select "On", then the stereo sound for things like movies and
music will be adjusted to a sound with a greater sense of realism.
Select "Cancel" or "OK". If you select "OK", it resets all settings of "Sound Mode
Adjust." to default settings.
GB
23
GB