Removing & Installing Body Components
Battery
Bolt
Washer
Positive terminal
#
Removal
Make sure the ignition switch is in the OFF
position.
Remove the seat.
1.
Remove the battery holder by removing
2.
the bolt and washer.
52
Battery holder
Negative
terminal
Battery
P. 54
2
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 41
2
P. 73
2