Resetting The Adjustments - Sony Trinitron CPD-100GS Operating Instructions Manual

Selecting the on-screen display language
English, French, German, Spanish and Japanese versions of
the OSDs are available.
1
Press the MENU button.
The MENU OSD appears.
MENU
2 Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
3
Press the ¨./> buttons to select "
4 Press the >?// buttons to select the desired
language.
ENG: English, FRA: French, DEU: German,
ESP: Spanish, or JPN: Japanese.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset to English, press the RESET button while the OSD
is on.

Resetting the Adjustments

Resetting an adjustment item
1
2
OPTION
ON
3
MANUAL DEGAUSS
(LANGUAGE)."
OPTION
ENG FRA
Resetting all of the adjustment data for
DEU ESP
JPN
the current input signal
LANGUAGE
When there is no OSD displayed, press the RESET
button.
All of the adjustments data for the current input signal is
reset to the factory settings.
Note that adjustment data not affected by changes in input
signal (OSD language , OSD position and the control lock
function) is not reset to the factory settings.
Resetting all of the adjustment data for all
input signals
Press and hold the RESET button for more than two
seconds.
All of the adjustment data, including the brightness and
contrast, is reset to the factory settings.
Getting Started
Customizing Your Monitor
Press the MENU, ¨./> and >?//buttons to select
the OSD containing the item you want to reset.
MENU
Press the ¨./> buttons to select the item you want
to reset.
Press the RESET button.
RESET
RESET
RESET
EN
F
ES
C
15