Advertisement
Quick Links
The
BG-150
is
system designed for use for bass
guitar
amplification
studio
and
on
combination
of
frequency
response
distortion
make,
ideal for the player looking for
a clean crisp sound.
Through careful
the requirements of bass guitar
reproduction we have designed a
system to meet the demands for
accurate
high
amplification. The system uses a
380mm
(15")
bass
response from 40 Hz to 400 Hz
where
the
internal
sends the signal to a 170mm
mid-driver
for
extending to
above
Both
drivers
are
cast
frame
type
distortion and high power handling. The crossover is a low-loss high power
design but can be by-passed for
switches.
Construction
This system is built to the same quality standards that are used in all EAW large
concert systems. This includes the use of cross grain laminated birch hardwood. The
BG-150 also comes road ready with perforated steel grill, recessed handles and corner
protection. The two component, catalized polyurethane finish is scuff, moisture and
solvent
resistant;
improvement
over
utilized for this purpose.
a
two-way
in
the
stage.
the
extended
high
and
low
this
system
analysis
of
level
driver
for
crossover
(0.5")
response
10,000
Hz.
professional
with
low
a
considerable
the
laquers
normally
bi-amped
applications
via
rear
panel
Advertisement
