End Of Service - Electrolux ELAI3 Series User Manual

Under counter dishwasher
Hide thumbs Also See for ELAI3 Series:
Table of Contents

Advertisement

brush or sponge. If another type of detergent is used, carefully
follow the producer's instructions and observe the safety rules
given in the information sheets provided with the product or
substance.
In order to reduce the environmental impact of pollutants it is
advisable to clean the machine (externally and, where
necessary, internally) with products that are more than 90%
biodegradable.
CAUTION
Do not use steel wool or similar material to
clean stainless-steel surfaces. Do not use
detergents containing chlorine.
WARNING
When using chemicals, comply
with the safety notes and dosage
recommendations printed on the
packaging. Refer to the chapter
A.3 Personal protection equip-
ment
for
products.
K.2

End of service

The appliance is designed to carry out an automatic cleaning
cycle to help flush out any residues and to guarantee greater
health and hygiene:
• Open the door and take out the rack containing the clean
dishes.
• Remove the flat filters "C".
C
• Remove the overflow "A" .
A
22
handling
chemical
30°C
86°F
C
• Close the door. Select the drain cycle by pressing button
Drain/Self cleaning cycle.
• The message "CLE" will be displayed throughout the drain
cycle:
• After a few minutes, 3 beeps indicate the end of the
cleaning cycle and the message "END" blinks on the
display:
• Switch off the dishwasher by pressing ON/OFF button.
• Switch off at the mains.
• Close the water supply tap.
• Remove the top and bottom wash and rinse arms "F" and "I",
unscrewing the ring nut "H".
F
C
• Carefully clean the washing and rinse jets and clean
everything with hot water and neutral deter-gent/detersive,
if necessary using a soft brush or sponge. Do not use sharp
implements to clean the nozzle holes, which could other-
wise be damaged.
• Clean the flat filters "C" under a water spray.
• Remove the tank filter "Z" and clean away any remained
food in order to avoid blocking the draining system.
2
Z
• Upon completion of cleaning operations, replace the parts
removed previously:
– tank filter "Z" and the overflow "A";
– the flat filters "C";
– top and bottom wash and rinse arms "F" and "I", screwing
the ring nut "H".
H
I
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents