Shallow Alarm - Eagle TriFinder 2 Installation And Operation Instructions Manual

To turn off the fish alarm without turning off fish symbols, press
MENU
until appears. Press to select , then
DOWN F A DOWN ARROW O
ISH LARM FF
press to clear the menu. Repeat the above steps to turn the alarm
PWR
back on, but press to select before clearing the menu.
UP ARROW O
N
Fish Alarm menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shallow
and a deep alarm. The shallow alarm sounds an alarm tone when the
bottom goes shallower than the alarm's setting. The deep alarm sounds
a tone when the bottom goes deeper than its setting. Both alarms ad-
just the same way, although through different menus.

Shallow Alarm

To set the shallow alarm depth, press repeatedly until
MENU DOWN
appears.
S A
HALLOW LARM
Shallow Alarm menu.
Press to increase the shallow alarm's depth setting or press
UP ARROW
36