Speed And Temperature Sensors - Eagle TriFinder 2 Installation And Operation Instructions Manual

Fish-finding & depth sounding sonar
Table of Contents

Advertisement

Transducer aimed
too far back
Full fish arch
Transducer angles and their effects on fish arches.
If the arch slopes up – but not back down – then the front of the trans-
ducer is too high and needs to be lowered. If only the back half of the
arch is printed, then the nose of the transducer is angled too far down
and needs to be raised.
NOTE:
Periodically wash the transducer's face with soap and water to re-
move any oil film. Oil and dirt on the face will reduce the sensitivity
or may even prevent operation.
Speed/Temperature Sensors
The TriFinder 2 can accept an optional speed sensor for showing speed
and distance traveled. It can also accept an optional temperature sen-
sor, or a combination speed/temp sensor.
Partial fish arches
Proper transducer angle
10
Transducer aimed
too far forward

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents