KitchenAid Nexgrill 720-0826E Installation Instructions And Use & Care Manual page 34

Change the Side Burner Orifice
1. Use a wrench to remove the side burner orifice brass
connector with flex line end to side burner tube.
2. Use 6 mm socket wrench or 6 mm nut driver to remove the
orifice.
3. Replace with the Natural gas orifice.
IMPORTANT: Check that the NG orifice is properly
installed inside of the valve.
4. Reinstall the orifice support and supply pipe and tighten
the nut with a 24 mm wrench.
Change the Rotisserie Burner Orifice
1. Use a screwdriver to remove the two screws from the
rotisserie burner heat shield. Remove the heat shield.
2. Remove the four screws on the rotisserie burner rear
cover.
34