Connecting This Unit To Your Computer - Sony MSAC-US20 Operating Instructions Manual

Connecting this unit to your computer

PNote
Be sure to install the supplied software before you connect this unit to your
computer. Restart your computer following installation.
Connect the USB jack on this unit to a USB jack on your computer using
the special USB cable supplied.
1
Firmly insert the Mini-B connector of the USB cable into the
USB jack on this unit as far as it will go.
2
Plug the A connector of the USB cable into a USB jack on your
computer.
• The "Found New Hardware Wizard" starts up and installation of
the driver begins. Depending on the OS, the driver installation may
take place automatically.
• The location of the USB jack on the computer differs with the
computer used.
• When using a computer with multiple USB jacks, do not connect
other devices, with the exception of a standard mouse and keyboard,
to USB jacks at the same time as this unit. When using a desktop
computer, use a USB jack on the main unit of the computer. For
details, see "Recommended ways for connecting this unit" on page
26.
25-GB