Sony LocationFree LF-B10 Operating Instructions Manual page 11

3
Connect the power cord to the Base Station.
AC power adapter
(supplied)
Wall outlet
Connect the power cord to the Base Station AC power
adapter, and the AC power adapter to the DC IN jack on
the Base Station, then plug the power cord into a wall
outlet.
Notes
• Use only the supplied AC power adapter.
• Do not bundle the cord of the AC power adapter and
the antenna cable together. It may be degrade the TV
picture quality where the TV signal is weak.
4
Press the POWER button on the front panel
of the Base Station to turn it on.
WIRELESS
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
The POWER LED on the front panel of the Base
Station lights green. Also, the SETUP MODE/
Base Station rear panel
IR BLASTER
1 2
LAN
S VIDEO
OUT IN
OUT IN 1
VIDEO VIDEO
L L
AUDIO AUDIO
R R
IN 2
VIDEO
L
DC IN 12V
AUDIO
R
TO DC IN
Power cord
(supplied)
11
NET AV LED blinks green until an automatic
NetAV check begins.
WIRELESS
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
5
(LF-B20 only) Check to see if the
WIRELESS LED lights green (2.4GHz) or
amber (5 GHz).
6
Check to see if the NETWORK LED lights
green.
If the NETWORK LED lights green, the
connection to the router is complete. Attach
the stand and connect to external devices,
and then setup the LocationFree Player.
Connecting a LocationFree device
to the Base Station wirelessly (LF-
B20 only)
If you want to connect your computer to the Base
Station wirelessly, set the wireless network
settings to communicate with the Base Station.
For more details, refer to the operating
instructions of your computer and your wireless
network devices.