Specifications - Makita DPB181 Instruction Manual

ENGLISH (Original instructions)
1-1. Battery cartridge
1-2. Button
1-3. Red indicator
2-1. Star marking
3-1. Trigger-lock button
3-2. Switch trigger
4-1. Lamp
5-1. Tighten

SPECIFICATIONS

Max. cutting capacity
Blade size
Overall dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for cutting in plastic and ferrous
materials.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 1.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-2. Loosen
5-3. Lever
6-1. Lower holder
6-2. Upper holder
7-1. Bottom bearing
8-1. Wheel
8-2. Rubber tire
9-1. Stopper plate
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
Net weight
Rated voltage
noise level determined
) : 78 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,CM
2
ENE088-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Portable Band Saw
Model No./ Type: DPB181
Conforms to the following European Directives:
2006/42/EC
ENG901-1
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
4
9-2. Screws
9-3. Blade
10-1. Hook
10-2. Screws
11-1. Axis
12-1. Stop ring
16-1. Cutting wax
DPB181
64 mm dia.
64 mm x 64 mm
3.2 m/s
835 mm
13 mm
0.5 mm
468 mm x 197 mm x 233 mm
3.2 kg
D.C. 18 V
ENH101-17