Troubleshooting - Electrolux EKG913A2OX User Manual

The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
There is no spark when
you try to activate the
spark generator.
There is no spark when
you try to activate the
spark generator.
There is no spark when
you try to activate the
spark generator.
The flame extinguishes im‐
mediately after ignition.
The flame ring is uneven.
The burners do not work.
The appliance makes
noises.
The flame colour is orange
or yellow.
The lamp does not oper‐
ate.
2. Clean the glass cover.
3. Replace the lamp with a suitable
300 °C heat-resistant lamp.
4. Install the glass cover.
Possible cause
The hob is not connected
to an electrical supply or it
is connected incorrectly.
The fuse is blown.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heat‐
ed up sufficiently.
Burner crown is blocked
with food residues.
There is no gas supply.
The lamp is defective.
ENGLISH
Remedy
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Place the burner cap and
crown correctly.
After lightning the flame,
keep the spark generator
activated for equal or less
than 10 seconds
Make sure that the injector
is not blocked and the
burner crown is clean.
Check the gas connection.
Some metal parts of the
appliance expand and con‐
tract when they heat up or
cool down. The noises are
normal.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
Replace the lamp.
23