Adeunis RF LoRaWAN 863-870 Quick Start Manual

Field test device

Hide thumbs Also See for LoRaWAN 863-870:

Download this manual

QUICK START GUIDE

Field Test Device LoRaWAN 863-870

LCD screen

Pushbutton 1

( send a frame )

ON/OFF

switch

1 long press resets the counters

to zero

1 long press shows the

configuration of the device

Charge indicator

1 simultaneous long press on these

buttons locks the main button and

forces the periodic mode

Pushbutton 2

( switch screens )

Micro USB connector

Need help?

Do you have a question about the LoRaWAN 863-870 and is the answer not in the manual?

Page 1 QUICK START GUIDE Field Test Device LoRaWAN 863-870 LCD screen Pushbutton 1 Pushbutton 2 ( send a frame ) ( switch screens ) ON/OFF Micro USB connector switch Charge indicator 1 long press resets the counters 1 simultaneous long press on these...
Page 2 Screens and features «Simplified» screen Indicator for uplink frame Indicator for downlink frame For uplink frame No network or very weak signal, , impossible installation. Bad network, frame loss ratio over 10%, installation strongly discouraged by adeunis. Good network, loss ratio below 10%, installation possible but transmitter autonomy not optimized.
Page 3 Screens and features GPS screen* GPS signal quality Number of received satellites * If GPS is turned off then this screen does not appear. Counters screen Packet Error Rate (%) : allows to evaluate the quality of the radio link with the network. A low % value indicates a good connection.
Page 4 Set up the FTD Download the IoT Configurator to easily configure the FTD. . Application available on Windows 10 and android (released 5.0 and above). https://www.adeunis.com/en/downloads/ https://play.google.com/store/apps/de- tails?id=com.adeunis.IoTConfiguratorApp Connect the FTD to a PC or a smartphone via the micro USB and launch the application.