Items For Data Files; Controlling Tvs With The Remote - Sony DVP-SR210P Reference Manual

◆Items for DATA files

Item Item Name, Function
ALBUM
Selects the album that contains music and photo
files to be played.
FILE
Selects the photo file to be played.
ALBUM
Selects the album that contains the video file to
be played.
FILE
Selects the video file to be played.
DATE
Displays the date the picture was taken by a
digital camera.
INTERVAL*
Specifies the duration for which the slides are
displayed on the screen.
EFFECT*
Selects the effects to be used for changing slides
during a slide show.
MODE 1: The images randomly cycle through
the effects.
MODE 2: The image sweeps in from top left to
bottom right.
MODE 3: The image sweeps in from top to
bottom.
MODE 4: The image sweeps in from left to right.
MODE 5: The image stretches out from the
center of the screen.
OFF: Turns off this function.
MEDIA
Selects the media type you want to play.
VIDEO: Plays video files.
PHOTO (MUSIC): Plays photo and music
files as a slide show. You can view a slide show
with sound when music and photo files are
placed in the same album. If the playing time of
either music or photos is longer, the longer one
continues without sound or image.
PHOTO: Plays photo files.
MUSIC: Plays music files. Press SUBTITLE
while playing music files that contain
unsynchronized lyric information. The player
supports MP3 ID3 Lyrics only.
* Depending on the file, this function may not be
possible.
6
The player automatically returns
to standby mode
If any button on the player or remote is not
pressed for more than 25 minutes, the player
automatically returns to standby mode.
To play VIDEO CDs with PBC
functions
When you start playing a VIDEO CD with
PBC (Playback control) functions, the menu
for your selection appears.
To play without using PBC
Press ./> or the number buttons while
the player is stopped to select a track, then
press N or ENTER. To return to PBC
playback, press x twice, then press N.

Controlling TVs with the remote

You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
If your TV is listed in the table below, set the
appropriate manufacturer's code.
When you replace the batteries of the remote,
set the appropriate code number again.
1 While holding down TV [/1, press the
number buttons to select your TV's
manufacturer's code.
2 Release TV [/1.
Code numbers of controllable TVs
Sony
Hitachi
LG/Goldstar/NEC 04
MGA/Mitsubishi
Panasonic
Philips
Pioneer
RCA
Samsung
Sharp
Toshiba
01 (default)
02
13
19
21
16
10
20
18
07