Beko ATP 7100 I Instruction Manual page 7

1
1.6 Vacuum Or Wash
The Pre-filter
Occasionally vacuum the exterior of
the fabric pre-filter to remove dust.
Always unplug the unit before re-
moving the fabric pre-filter.
1. Carefully rotate the body anti-
clockwise and remove it from the air
inlet grill.
2. Remove the pre-filter from the
HEPA filter.
Air purifier/ Instruction Manual
3. Wash the pre-filter in the wash-
ing machine.
4. After the pre-filter is cleaned well
and dried, attach the pre-filter onto
the HEPA filter.
5. Carefully put the HEPA filter with
pre-filter into the air inlet grill.
6. Put the body onto the air inlet
grill, then rotate the body clockwise
until the fastener locks into the
groove.
Groove
Fastener
7 / EN