Connector Repair; Vga P6 - HP 24fh Maintenance And Service Manual

Connector repair

This procedure includes VGA, HDMI connectors.
The connectors are on the main board.
The connectors identifiers are as follows:
Connector
VGA
HDMI
Before repairing connectors, follow these steps:
▲
Prepare the monitor for disassembly. See Preparation for disassembly on page 12.

VGA P6

Repair the VGA connector:
1) Use a hot air gun to melt the solder on the pins. Pin solder with soldering iron and absorber. You can gently
push down with the soldering iron once everything is molten to move the CN201 out of the through holes.
Location
P6
P3 (P4)
17