Cleaning And Maintenance; Protecting The Environment - Black & Decker TS75R Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
Extension cables & class 1 product
If an extension lead is required a 3 core cable must be used
as your appliance is earthed and of class 1 construction.
Up to 30m (100ft) can be used without loss of power.
Power plugs must match the outlet. Never modify the
plug in anyway. Do not use any adapter plugs with
earthed (Class 1) appliances. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
Features
1. Temperature indicator
2. Drip tray
Fig A
3. Lower plate
4. Upper plate
Before first use
Remove all packaging from the appliance.
Clean the appliance before first use.
Use
Warning! Always place the appliance on a flat, clean and
non-slip surface before operating it.
Warning! Do not leave the unit unattended while in use.
Preheating
Do not touch hot parts. The plates (3 & 4)
will become hot during use.
Place the appliance on a suitable surface.
Connect the plug to a power socket; the temperature
indicator (1) will light up.
When the unit reaches the correct cooking temperature the
temperature indicator (1) will go out. This indicates that
the unit is at the correct temperature and is ready for use.
Toasting
Preheat the plates as described above.
Open the appliance and place a slice of buttered bread
onto the lower plate (3), with the buttered side down.
Add the required filling and place another piece of
buttered bread on top, with the buttered side up.
If required repeat for a second sandwich.
Make sure that the drip tray (2) is located within the
aperture below the funnel. This will make sure that
all excess oil/fat is contained.
Close the cooking plates by carefully lowering the upper
plate (4).
4
Warning! The contents of a toasted sandwich may be very
hot.
After approx. 2-3 minutes, the sandwiches will be ready.
The time may vary depending on your taste, the type of
bread and the filling.
Grilling
Preheat the plates as described above.
Open the appliance and lightly brush both cooking
plates (3 and 4) with butter, margarine or cooking oil to
prevent the food sticking to the cooking plates.
Make sure that the unit is at the correct cooking
temperature (temperature indicator (1) is off).
Make sure that the drip tray (2) is located within the
aperture below the funnel. This will make sure that all
excess oil/fat is contained.
Open the appliance and add the food to the lower
cooking plate (3).
Close the cooking plates by carefully lowering the upper
plate (4).
Note: Avoid thick foods as these will prevent the unit from
closing properly.
Note: The cooking time will vary depending upon the food
type and thickness.
Check the food regularly to avoid burning.

Cleaning and maintenance

Warning! Before cleaning and maintenance, switch the
appliance off, remove the plug from the socket and allow the
appliance to cool.
Warning! Do not immerse the appliance, the cord set or the
plug in water or any other liquid.
Wipe the exterior with a damp cloth.
Do not use scouring pads.
If necessary, use a mild detergent to remove spots. Do
not use any abrasive or solvent based cleaner.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.

Advertisement

Table of Contents
loading

Table of Contents