Indicators on the Enclosure Bezel
An optional locking bezel can be installed on the front of the enclosure to limit access. Figure 1-1
illustrates the indicators and components on the bezel. Table 1-1 lists conditions indicated by the lights on
the bezel. For information on installing and removing the bezel, see "Removing and Replacing the Front
Bezel."
Figure 1-1. LEDs on the Front Bezel
Table 1-1. Front Bezel Indicators
Item LED Indicator
1
Split mode (green)
2
Power (green)
3
Enclosure status
(blue/amber)
8
About Your System
1
2
3
LED Icon
Condition
When lit, indicates the enclosure is in split mode;
otherwise, the enclosure is in unified mode. For more
information on both modes, see "Unified Mode and Split
Mode."
When lit, at least one power supply is supplying power to
the enclosure.
Steady amber: Power is on and enclosure is in reset state
Steady blue: Power is on and enclosure status is OK.
Flashing blue: Host server is identifying the enclosure.
Flashing amber: Enclosure is in fault state.