Drive Carrier Led Indicators - Dell PowerVault MD1000 Hardware Owner's Manual

Table 1-2. Front-Panel Components (continued)
Component
Power LED (green)
Split mode LED (green)
Enclosure mode switch

Drive Carrier LED Indicators

Each drive carrier in your enclosure has two LEDs: an activity LED (green) and a bi-color (green/amber)
status LED (see Figure 1-3). The activity LED flashes whenever the drive is accessed. Table 1-3 lists the
flash patterns for the status LED.
Figure 1-3. Drive Carrier LED Indicators
10
About Your System
Icon Condition
When lit, at least one power supply is supplying power to
the enclosure.
When lit, indicates the enclosure is in split-mode
configuration; otherwise, the enclosure is in unified mode.
For more information, see "Unified Mode and Split
Mode."
When set in its uppermost position at power on, the
enclosure is configured in unified mode; when set in its
lowermost position at power on, the enclosure is
configured in split mode.
NOTE:
the switch setting after power on will have no effect on
enclosure configuration until the system is power cycled.
1
1 activity LED
This switch must be set prior to power on. Changing
2 status LED
2