Listening To The Radio - Sharp CD-BP99V Operation Manual

Video cd mini system
Table of Contents

Advertisement

Available languages

Available languages

Listening to the radio

CD-BP99V
E-25
ENGLISH
General control (See page 10.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING/TIME (
or
) button to tune in to the desired
station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the de-
sired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
Notes:
" When radio interference occurs, auto scan tuning may stop automatically at
that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING/TIME button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
" If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
01/7/13
CD-BP99V(X)E3.fm

Advertisement

Table of Contents
loading

Table of Contents