In the Microsoft Windows Vista™ operating system, click the Windows Vista Start button
•
and Support→ Computer Information.
DIMM B Connector
To install a memory module in the DIMM B connector:
1 Follow the procedures in "Before You Begin" on page 109.
2 Turn the computer upside-down, loosen the captive screw on the memory module cover (see "Bottom
View" on page 23), and remove the cover.
1
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the memory-module
securing clips.
3 If you are replacing a memory module, remove the existing module:
Use your fingertips to carefully spread apart the securing clips on each end of the memory module
a
connector until the module pops up.
Remove the module from the connector.
b
1
captive screw
2
2
memory module cover
→ Help
117
Before You Begin