Removing the Keyboard
1 Follow the procedures in "Before You Begin" on page 137.
2 Remove the hinge cover (see "Hinge Cover" on page 143).
3 Remove the two screws at the top of the keyboard.
The key caps on the keyboard are fragile, easily dislodged, and time-
consuming to replace. Be careful when removing and handling the keyboard.
4 Lift the keyboard and hold it up and slightly forward to access to the
5 To disconnect the keyboard cable from the keyboard connector on the
system board, rotate the keyboard connector latch toward the front of the
6 Slide the keyboard cable out of the keyboard connector on the DIMM A
memory module cover.
cable release lever
Adding and Replacing Parts