Polygroup Home Heritage TG90M3W92D00 Assembly Instructions
Polygroup Home Heritage TG90M3W92D00 Assembly Instructions

Polygroup Home Heritage TG90M3W92D00 Assembly Instructions

Advertisement

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set®
technology-Set up and light up your tree in less than 10 minutes! Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 3
Section 2
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap
before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all
wires are free of branch hinges.
7. Just plug the adaptor (connecting with the tree power cord) into the wall outlet (See Fig. B), your
entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or
broken, loose or missing bulbs. Replace bulbs promptly in order to maintain the performance and life
expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)
Fig. C
Top view
MODEL #: TG90M3W92D00, TG90M3W92D01
Click
Tree top
Control box
Side view
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120VAC, 60Hz, 0.25A
Output: 29V DC 0.45A
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Insert Green
Label Extension
Cord into Adaptor
1
Adaptor
To Be Plugged
Into Wall
Outlet

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Home Heritage TG90M3W92D00 and is the answer not in the manual?

Questions and answers

Summary of Contents for Polygroup Home Heritage TG90M3W92D00

  • Page 1 TREE ASSEMBLY INSTRUCTIONS Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set® technology-Set up and light up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree.
  • Page 2 9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. STORAGE INSTRUCTIONS 1. Unplug adaptor from the wall outlet first and then remove all ornaments and decorations. 2.
  • Page 3 m. This product is equipped with push-in type lamps. Do not twist lamps. n. Read and follow all instructions that are on the product or provided with the product. SAVE THESE INSTRUCTIONS USER SERVICING INSTRUCTIONS Lamp Replacement Step 1. Unplug from power source, by pulling out the adaptor itself - do not pull on the power cord. Step 2.

This manual is also suitable for:

Home heritage tg90m3w92d01

Table of Contents