Printer Problems - Dell Dimension 2400 Series Owner's Manual

F THE POWER LIGHT IS AMBER AND GREEN OR STEADY AMBER
I
but an internal power problem might exist.
• Ensure that the voltage selection switch is set to match the AC power at your location (if applicable).
• Ensure that the processor power cable is securely connected to the system board (see page 51).
F THE POWER LIGHT IS BLINKING AMBER
I
• Remove and then reinstall the memory modules (see page 64).
• Remove and then reinstall any cards (see page 51).
• Remove and then reinstall the graphics card, if applicable (see page 51).
E LIMINATE INTERFERENCE — Some possible causes of interference are:
• Power, keyboard, and mouse extension cables
• Too many devices on a power strip
• Multiple power strips connected to the same electrical outlet

Printer Problems

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTE:
If you need technical assistance for your printer, contact the printer's manufacturer.
.
HECK THE PRINTER DOCUMENTATION
C
information.
NSURE THAT THE PRINTER IS TURNED ON
E
C HECK THE PRINTER CABLE CONNECTIONS
• See the printer documentation for cable connection information.
• Ensure that the printer cables are securely connected to the printer and the computer (see page 11).
T EST THE ELECTRICAL OUTLET
device, such as a lamp.
— A device might be malfunctioning or incorrectly installed.
— See the printer documentation for setup and troubleshooting
—
— Ensure that the electrical outlet is working by testing it with another
— The computer is receiving electrical power,
29
Solving Problems