Appendix C: RTU Open Points/Properties on the Equipment Touch
NOTE Engineering units shown in this document in the defaults and ranges are strictly for reference. You must
enter an integer only.
Navigation screens
Screen Names
Display
Standby
Home
RTU Open v3
Installation and Start-up Guide
Appendix C: RTU Open Points/Properties on the Equipment Touch
Details
Screen displays after the Inactivity Timer expires
(default is 5 minutes).
Displays:
•
Space temperature
•
Current setpoints
•
Mode
•
Occupancy
•
OAT, if available
Not an interactive screen. Touch anywhere to advance
to Home screen.
Displays:
•
Space temperature
•
Current setpoints
•
Mode
•
Occupancy
•
OAT, if available
Allows:
•
Pushbutton Override
•
Space Setpoint Offset Adjustment
Click
on the right to navigate to Snapshot screen.
93
CARRIER CORPORATION ©2019
All rights reserved