Advertisement
Quick Links
DAILY
NUMATIC TWINTEC CABLE
AFTER EVERY USE, ENSURE
THAT YOU COMPLETE THE
FOLLOWING 6 STEPS
1.
Empty the recovery tank and rinse
thoroughly with clean water.
3.
Ensure the seperator is clean and un-
damaged. Replace seal if necessary.
5.
IMPORTANT: Clean underside of
squegee from dirt and debris.
REPORT ALL DAMAGES AND TECHNICAL ISSUES TO THE SUPERVISOR
MAINTENANCE CHART
ET4045
2.
Clean out the debris filter basket
located under the seperator hood.
4.
Clean suction pod filter located in the
seperator hood behind the black flap.
6.
Store machine with seperator lifted
from the tank to avoid condensation.
NET4045DMVNo1
Advertisement
Related Manuals for Numatic TWINTEC CABLE ET4045
Summary of Contents for Numatic TWINTEC CABLE ET4045
- Page 1 DAILY MAINTENANCE CHART NET4045DMVNo1 NUMATIC TWINTEC CABLE ET4045 AFTER EVERY USE, ENSURE THAT YOU COMPLETE THE FOLLOWING 6 STEPS Empty the recovery tank and rinse Clean out the debris filter basket thoroughly with clean water. located under the seperator hood.
- Page 2 WEEKLY MAINTENANCE CHART NET4045WMVNo1 NUMATIC TWINTEC CABLE ET4045 AFTER EVERY WEEK, ENSURE THAT YOU COMPLETE THE FOLLOWING 4 STEPS Check all all hoses for damage, holes and Thoroughly clean top seperator hood and seal. obstructions. Clean and replace as necessary.
Need help?
Do you have a question about the TWINTEC CABLE ET4045 and is the answer not in the manual?
Questions and answers