Bulldog Security TR35 User Manual

Your Bulldog TR35 needs registering before you can enjoy the full tracking experience at:
During the registration you will need the tracker IMEI and Sim Serial Number printed on the white card
that accompanied your tracker. After successful registration, you will receive an email giving full details
of the tracking service and how to track your Bulldog TR35 via your smartphone and online.
In this guide: text in red
reference image in this guide, Fig 2 to 5.
Before using your Bulldog TR35, the battery should be fully charged.
Remove the 2 screws from the access cover on the end of the tracker to reveal the charging point as
shown in Fig 1. Keep the screws, rubber gland and the cover in a safe place whilst charging.
To charge the battery ensure the
TR35 to a USB wall charger using the supplied USB cable.
Whilst charging, the LED Indicator Light will glow blue.
When the battery is fully charged, indicator turns green. Note: While charging, the device may become
warm. This is normal, and this does not affect your device's lifespan or performance. If the battery
power is low, it may affect positioning and data transmission.
Fig. 1
www.bulldogtracking.co.uk/register
refers to a command / option in our tracking app and in
On / Off Switch
Screws
for cover
TR35/201805-15/GEN
(Fig 1) is in the off position (left), connect the Bulldog
Drop Charging
Switch Port
On / Off
TR35
User Guide
blue refers to a
LED Indicator
(On Top)
1