Sy-01327 Data Error - DataCard SP25 Plus Printer Manual

SY-01327 Data Error

The request sent to the printer is not supported.
Possible Cause 1: The printer type has changed to SP55 or SP60. The
SmartDriver Printer Toolbox, Properties, or Printing Preferences dialog box
has not changed to remove settings that are not supported by the printer and
you have chosen and applied a setting that the printer does not support.
Solution 1: Close the SmartDriver Properties or Printing Preferences dialog
box and open it again to display the settings for the printer. On the Printer
Toolbox, wait until "The printer type is SP55." or "The printer type is SP60."
appears before using buttons or settings in the Printer Toolbox, SmartDriver
Diagnostics, or the Properties or Printing Preferences dialog boxes.
Possible Cause 2: For a directly networked printer, the message "A printer
has been identified. (DR 00921)" was displayed on the PC and the OK or
Close button was used. After that, you used the Printer Toolbox, Diagnostics,
or the Properties or Printing Preferences dialog box before settings were
updated for this printer.
Solution 2: Do not close the message box. Follow the instruction to wait
until the message box closes on its own. If you are using SmartDriver
Diagnostics, close it and wait until the message box closes on its own.
Page 79